Açıklama

AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L’nin Sökülmesi/Yeniden Montajı

Giriş

Konica Minolta’nın AccurioPress C3080/C3080P/C3070 ve AccurioPrint C3070L modelleri, dijital renkli baskı teknolojisinin en son örneklerinden biridir. Bu yazıcılar, yüksek hızlı baskı yetenekleri, geniş medya desteği ve otomatik çift taraflı baskı gibi özellikleri ile dikkat çekmektedir ¹. Ancak, bu karmaşık makinelerin bakımı ve onarımı sırasında bazen parçaların sökülmesi ve yeniden montajı gerekebilir. Bu makalede, bu modellerin sökülme ve yeniden montaj prosedürlerini detaylı bir şekilde inceleyeceğiz.

Sökme/Yeniden Montaj Prosedürü

Sonuç

Konica Minolta AccurioPress C3080/C3080P/C3070 ve AccurioPrint C3070L modelleri, yüksek hızlı baskı, geniş medya desteği ve büyük kağıt kapasitesi gibi özellikleri ile dikkat çekici bir yazıcıdır. Ancak, bu yazıcıların bakımı ve onarımı sırasında bazen parçaların sökülmesi ve yeniden montajı gerekebilir. Bu işlemler, genellikle bir servis teknisyeni tarafından gerçekleştirilir ve yazıcının düzgün çalışmasını sağlar.

Sıkça Sorulan Sorular

AccurioPress ve AccurioPrint modellerinde hangi parçalar sökülmemeli?
- AccurioPress ve AccurioPrint modellerinde, kullanıcıların veya servis teknisyenlerinin sökmemesi gereken belirli parçalar vardır ². Bu parçalar genellikle hassas bileşenlerdir ².
Sökme işlemi nasıl gerçekleştirilir?
- Sökme işlemi, genellikle bir servis teknisyeni tarafından gerçekleştirilir ². Bu işlem sırasında, teknisyen önce yazıcının gücünü keser ve sonra sökülecek parçayı belirler ².
Yeniden montaj işlemi nasıl gerçekleştirilir?
- Yeniden montaj işlemi, sökme işleminin tersidir ². Teknisyen, çıkarılan parçayı dikkatlice yerine yerleştirir ve sonra yazıcının gücünü tekrar açar ².
Sökme ve yeniden montaj işlemleri kim tarafından gerçekleştirilmeli?
- Sökme ve yeniden montaj işlemleri, genellikle bir servis teknisyeni tarafından gerçekleştirilir ².
Sökme ve yeniden montaj işlemleri neden önemlidir?
- Sökme ve yeniden montaj işlemleri, yazıcının bakımı ve onarımı sırasında önemlidir. Bu işlemler, yazıcının düzgün çalışmasını sağlar ².

1 List of Items that you must not disassemble
1.2 Items that you must not disassemble
1.2.1 Screw-lock applied screw
1.2.2 Prohibition of adjusting the volume of boards
1.2.3 CCD unit
1.2.4 Writing unit cover
1.2.5 Photo conductor section
1.2.6 Intermediate transfer section
1.2.7 Registration section
1.2.8 Fusing section
2. WARNING AND PRECAUTION ON DISASSEMBLING
2.1 Precaution on removing the boards
3. AccurioPress C3080/C3080P/C3070, AccurioPrint C3080L
3.1 List of disassembling and assembling parts
3.2 Disassembling and assembling procedures
3.2.1 Duct cover
3.2.2 Rear cover
3.2.3 Left cover
3.2.4 Right cover/Up1, right cover/Up2, right cover/Up3, right cover/Up4, right cover/Lw1, right cover/Lw2
3.2.5 Top cover/Fr, top cover/Rt, top cover/Rr1, top cover/Rr2, top cover/Lt, arm cover/Fr, arm cover/Rr
3.2.6 Main board unit
3.2.7 Overall control board (OACB)
3.2.8 SSD (SSD)
3.2.9 Original glass assy
3.2.10 WT-511 (Option)
3.2.11 CCD unit
3.2.12 LED exposure unit
3.2.13 Scanner drive board (SCDB)
3.2.14 Scanner motor (M201)
3.2.15 IQ image processing board (IPB/I) (Option : IQ-501)
3.2.16 Writing unit
3.2.17 Process unit
3.2.18 Image correction unit
3.2.19 Toner bottle motor, toner bottle clutch, remaining toner sensor, toner supply motor
3.2.20 Duplex section
3.2.21 Paper feed tray
3.2.22 Tray up down wire/1, tray up down wire/2 (Tray1)
3.2.23 Tray up down wire/3, tray up down wire/4 (Tray2)
3.2.24 Tray up down wire/5 (Tray2)
3.2.25 Fusing paper exit plate assy
3.2.26 Temperature sensor/1 (TH1), temperature sensor/2 (TH2), thermostat/1 (TS1), thermostat/2 (TS2)
3.2.27 Thermostat/3 (TS3)
3.2.28 Temperature sensor/5 (TH5)
3.2.29 Fusing separation fan/1 (FM10), fusing separation fan/2 (FM11) and fusing separation fan/3 (FM12)
3.2.30 Replacement of the fusing ball bearings/Up, /Lw1, the heat insulating sleeves/Up, /Lw1, the belt regulating sleeve, the fusing belt, the fusing rollers/1, /2, and the neutralizing ring
3.2.31 HDD1, HDD2, HDD3
3.2.32 Hard disk/4 (HDD4)
3.2.33 Charge control framework unit
3.2.34 Tucking fan/4 (FN35) and tucking fan/5 (FM36)
4. DF-706
4.1 List of disassembling and assembling parts
4.2 Disassembling and assembling procedures
4.2.1 Front cover
4.2.2 Rear cover
4.2.3 DF-706
4.2.4 Front side glass cleaning roller unit
4.2.5 Back side glass cleaning roller unit
4.2.6 CIS module (CIS)
4.2.7 DF control board (DFCB)
4.2.8 Restriction plate positional volume (VR1)
4.2.9 DF power supply board (DFPU)
4.2.10 Sensor control board (SCB)
4.2.11 Multi feed detection board/1 (transmitter) (MFDB/1)
4.2.12 Multi feed detection board/2 (receiver) (MFDB/2)
4.2.13 Paper feed motor (M1)
4.2.14 Registration motor (M2)
4.2.15 Reading motor (M3)
4.2.16 Exit motor (M4)
4.2.17 Reading roller pressure release motor (M6)
4.2.18 Back side cleaning motor (M7)
4.2.19 Front side cleaning motor (M8)
4.2.20 Paper feed clutch (CL1)
4.2.21 Cooling fan motor (FM)
4.2.22 Replacing the separation roller torque limiter
5. PF-602m
5.1 List of disassembling and assembling parts
5.2 Disassembling and assembling procedures
5.2.1 Precautions on disassembling and assembling
5.2.2 Right cover
5.2.3 Rear cover/Lt2
5.2.4 The rear cover/Lt1 and /Rt
5.2.5 Front door
5.2.6 Tray
5.2.7 Lift wire
5.2.8 Paper lift motor/1 (M2) and /2 (M3)
5.2.9 Vertical conveyance unit
5.2.10 Horizontal conveyance unit
5.2.11 The multi feed detection board (MFDBR and MFDBS)
6. PF-707m
6.1 Items you must not disassemble or reassemble
6.1.1 Framework panel/1, framework panel/2
6.2 List of disassembling and assembling parts
6.3 Disassembling and assembling procedures
6.3.1 Precautions on disassembling and assembling
6.3.2 Right cover
6.3.3 Rear cover/Lt4
6.3.4 Rear cover/Lt2 and /Lt3
6.3.5 Rear cover/Lt1
6.3.6 Rear cover/Rt
6.3.7 Front door
6.3.8 Tray front cover
6.3.9 Tray
6.3.10 Lift wire
6.3.11 Paper leading edge separation fan /Fr1 (FM9), /Fr2 (FM13), /Fr3 (FM17), /Rr1 (FM4), /Rr2 (FM8), /Rr3 (FM12)
6.3.12 Paper leading edge shutter solenoid /1 (SD10), /2 (SD14), /3 (SD18)
6.3.13 Paper lift motor /1 (M7), /2 (M8), /3 (M9)
6.3.14 Paper feed suction unit
6.3.15 Paper feed belt
6.3.16 Paper suction fan/1 (FM1), /2 (FM2), /3 (FM3), /4 (FM4), /5 (FM5), /6 (FM6)
6.3.17 Paper feed assist fan/Fr1 (FM11), /Fr2 (FM15), /Fr3 (FM19), /Rr1 (FM12), /Rr2 (FM16), /Rr3 (FM20)
6.3.18 Shutter solenoid/Fr1 (SD5), /Fr2 (SD10), /Fr3 (SD15), /Rr1 (SD6), /Rr2 (SD11), /Rr3 (SD16)
6.3.19 Paper feed check window
6.3.20 Vertical conveyance unit
6.3.21 Registration drive unit
6.3.22 Horizontal conveyance unit
6.3.23 Multi feed detection board (MFDBR, MFDBS)
7. FA-502
7.1 List of disassembling and assembling parts
7.2 Disassembling and assembling procedures
7.2.1 Precautions on disassembling and assembling
7.2.2 FA-502
8. LU-202m, LU-202XL, LU-202XLm
8.1 List of disassembling and assembling parts
8.2 Disassembling and assembling procedures
8.2.1 Precautions on disassembling and assembling
8.2.2 Upper door
8.2.3 Upper door/Rt (LU-202XL, LU-202XLm)
8.2.4 Clutch cover
8.2.5 Paper feed cover
8.2.6 Right cover (LU-202m)
8.2.7 Right cover (LU-202XL, LU-202XLm)
8.2.8 Front cover (LU-202m)
8.2.9 Front cover (LU-202XL, LU-202XLm)
8.2.10 Rear cover (LU-202m)
8.2.11 Rear cover (LU-202XL)
8.2.12 Rear cover (LU-202XLm)
8.2.13 Replacing the lift wire (LU-202m)
8.2.14 Replacing the lift wires (LU-202XL, LU-202XLm)
8.2.15 Paper size VR (VR1) (LU-202m)
8.2.16 Paper size VR (VR1) (LU-202XL, LU-202XLm)
8.2.17 Multi feed detection boards/S (MFDBS), R (MFDBR) (LU-202XL, LU-202XLm)
9. MB-506
9.1 List of disassembling and assembling parts
9.2 Disassembling and assembling procedures
9.2.1 Precautions on disassembling and assembling
9.2.2 Paper size VR/BP (VR3)
10. MB-508
10.1 List of disassembling and assembling parts
10.2 Disassembling and assembling procedures
10.2.1 Precautions on disassembling and assembling
10.2.2 Right cover/Fr and Right cover/Rr
10.2.3 Right cover/Lw
10.2.4 Rear cover
10.2.5 Bypass tray
10.2.6 Paper size VR/BP (VR3)
11. MK-744C
11.1 List of disassembling and assembling parts
11.2 Disassembling and assembling procedures
11.2.1 Precautions on disassembling and assembling
11.2.2 Status indicator light
12. OT-510
12.1 Items not allowed to be disassembled/reassembled
12.1.1 Screws painted in red
12.2 List of disassembling and assembling parts
12.3 Disassembling and assembling procedures
12.3.1 Precautions on disassembling and assembling
12.3.2 Front door
12.3.3 Rear cover
12.3.4 Upper cover /Rt1
12.3.5 Upper cover /Rt2
12.3.6 Upper cover /Fr1
12.3.7 Upper cover /Fr2
12.3.8 Upper cover /Rr
12.3.9 Upper cover /Md
12.3.10 Sub tray
12.3.11 Main tray
12.3.12 Main tray up down motor (M11), main tray up-down drive assy
12.3.13 Note for replacing the board
13. OT-511
13.1 List of disassembling and assembling parts
13.2 Disassembling and assembling procedures
13.2.1 Paper exit unit
13.2.2 Left cover/Up, /Lw
13.2.3 Rear cover
13.2.4 Conveyance door
14. EF-103
14.1 List of disassembling and assembling parts
15. MK-740/MK-740m
15.1 List of disassembling and assembling parts
15.2 Disassembling and assembling procedures
15.2.1 Paper feed tray
15.2.2 Paper exit tray
16. RU-518/HM-103
16.1 Items that you must not disassemble or reassemble
16.1.1 Red-painted screws
16.2 List of disassembling and assembling parts
16.3 Disassembling and assembling procedures
16.3.1 Upper cover/Rr
16.3.2 Paper exit cover/Lt
16.3.3 Duct/Rt
16.3.4 Duct/Lt
16.3.5 Rear cover/Up
16.3.6 Rear cover/Md
16.3.7 Water storage tank cover
16.3.8 Color sensor unit
16.3.9 Water storage tank
16.3.10 Humidification unit
16.3.11 Note for replacing the board
17. RU-510
17.1 List of disassembling and assembling parts
17.2 Disassembling and assembling procedures
17.2.1 Precautions on disassembling and assembling
17.2.2 Front door
17.2.3 Rear cover
17.2.4 Left cover
17.2.5 Upper cover
17.2.6 Note for replacing the board
18. FS-531
18.1 List of disassembling and assembling parts
18.2 Disassembling and assembling procedures
18.2.1 Precautions on disassembling and assembling
18.2.2 Upper cover/1
18.2.3 Upper cover/2
18.2.4 Front door
18.2.5 Rear cover
18.2.6 Left cover
18.2.7 Main tray
18.2.8 Replacing the up down wire
18.2.9 Stacker unit
18.2.10 Paper exit opening unit
18.2.11 Note for replacing the board
19. FS-612
19.1 Items that you must not disassemble or reassemble
19.1.1 Screw not allowed to be removed on the folding stopper
19.2 List of disassembling and assembling parts
19.3 Disassembling and assembling procedures
19.3.1 Precautions on disassembling and assembling
19.3.2 Upper cover/1
19.3.3 Upper cover/2
19.3.4 Front door
19.3.5 Rear cover
19.3.6 Left cover
19.3.7 Main tray
19.3.8 Replacing the up down wire
19.3.9 Stacker unit cover
19.3.10 Stacker unit
19.3.11 Paper exit opening unit
19.3.12 Note for replacing the board
20. PK-512/513
20.1 Items that you must not disassemble and adjust
20.1.1 Punch unit
20.2 Disassembly/reassembly parts list
20.3 Disassembly/reassembly procedure
20.3.1 Precautions on disassembling and assembling
20.3.2 Punch unit
21. IQ-501
21.1 Items that you must not disassemble or reassemble
21.1.1 Red-painted screws
21.2 List of disassembling and assembling parts
21.3 Disassembling and assembling procedures
21.3.1 Precautions on disassembling and assembling
21.3.2 Note for assembling and disassembling the IQ-501
21.3.3 Upper cover/Fr
21.3.4 Upper cover/Rr
21.3.5 Upper cover/Md
21.3.6 Rear cover
21.3.7 Scanner unit/1
21.3.8 Scanner calibration unit/1
21.3.9 Scanner cleaning brush/1, Scanner B&W standard part/1, Scanner white backing/1, Scanner black backing/1-1, /1-2
21.3.10 Scanner unit/2
21.3.11 Scanner calibration unit/2
21.3.12 Scanner cleaning brush/2, Scanner B&W standard part/2, Scanner white backing/2, Scanner black backing/2-1, /2-2
21.3.13 Colorimeter unit
21.3.14 Colorimeter calibration unit/1
21.3.15 Colorimeter white calibration block
21.3.16 Note for replacing the board
22. PI-502
22.1 List of disassembling and assembling parts
22.2 Disassembling and assembling procedures
22.2.1 Precautions on disassembling and assembling
22.2.2 Upper cover
22.2.3 Rear cover
22.2.4 Operation panel cover
22.2.5 PI unit
23. FS-532
23.1 Items that you must not disassemble or reassemble
23.1.1 Red-painted screws
23.2 List of disassembling and assembling parts
23.3 Disassembling and assembling procedures
23.3.1 Precautions on disassembling and assembling
23.3.2 Front door
23.3.3 Rear cover
23.3.4 Upper cover/Rt1
23.3.5 Upper cover/Rt2
23.3.6 Upper cover/Fr1
23.3.7 Upper cover/Fr2
23.3.8 Upper cover/Rr
23.3.9 Upper cover/Md
23.3.10 Front cover
23.3.11 Sub tray
23.3.12 Stacker unit
23.3.13 Main tray
23.3.14 Main tray up down motor (M11), main tray up-down drive assy
23.3.15 Note for replacing the board
24. SD-510
24.1 Items that you must not disassemble or reassemble
24.1.1 Red-painted screws
24.2 List of disassembling and assembling parts
24.3 Disassembling and assembling procedures
24.3.1 Precautions on disassembling and assembling
24.3.2 Front cover
24.3.3 Stapler unit cover
24.3.4 SD unit
24.3.5 Folding knife assy/1
24.3.6 Folding knife assy/2
25. PK-522
25.1 Items that you must not disassemble or reassemble
25.1.1 Red-painted screws
25.2 List of disassembling and assembling parts
25.3 Disassembling and assembling procedures
25.3.1 Precautions on disassembling and assembling
25.3.2 Punch unit
26. LS-506
26.1 List of disassembling and assembling parts
26.2 Disassembling and assembling procedures
26.2.1 Precautions on disassembling and assembling
26.2.2 Cover
26.2.3 Replacing the stacker tray up/down wire
27. FD-503
27.1 Items that you must not disassemble or reassemble
27.1.1 Folding/conveyance switching position adjustment section
27.2 List of disassembling and assembling parts
27.3 Disassembling and assembling procedures
27.3.1 Precautions on disassembling and assembling
27.3.2 Upper cover/Fr + PI cover/Fr
27.3.3 Upper cover/Rr + PI cover/Rr
27.3.4 Upper door
27.3.5 Rear cover
27.3.6 Left cover/Fr
27.3.7 Left cover/Rr
27.3.8 Paper exit stopper cover
27.3.9 Right cover
27.3.10 Left cover/Up
27.3.11 Mount cover
27.3.12 Front door
27.3.13 Cleaning the 2nd folding conveyance sensor (PS53)
27.3.14 Cleaning the 3rd folding conveyance sensor (PS54)
27.3.15 Cleaning the 3rd folding roller
27.3.16 Folding conveyance section
27.3.17 Main tray up/down wire
27.3.18 Multi feed detection board /1 (MFDB/1) and /2 (MFDB/2)
27.3.19 Note for replacing the board
28. SD-506
28.1 Items not allowed to be disassembled/reassembled
28.1.1 Trimmer blade home sensor (PS50), Trimmer blade upper limit sensor (PS51)
28.1.2 Trimmer completion sensor (PS62)
28.1.3 Wire slack prevention sensor (PS66)
28.1.4 Trimmer press upper limit sensor (PS52), Trimmer press home sensor (PS53)
28.1.5 Trimmer press brake
28.1.6 Fixing screw of the trimmer press timing belt
28.2 List of disassembling and assembling parts
28.3 Disassembling and assembling procedures
28.3.1 Precautions on disassembling and assembling
28.3.2 Rear cover/Lt
28.3.3 Rear cover/Rt
28.3.4 Left cover
28.3.5 Upper cover/Fr
28.3.6 Upper cover/Rr3
28.3.7 Sub tray cover
28.3.8 Front door/Lt
28.3.9 Front door/Rt
28.3.10 Folding unit
28.3.11 Note for replacing the board
29. SD-513
29.1 Items that you must not disassemble or reassemble
29.1.1 Red-painted screws
29.2 List of disassembling and assembling parts
29.3 Disassembling and assembling procedures
29.3.1 Precautions on disassembling and assembling
29.3.2 Rear cover/Rt, /Lt
29.3.3 Right cover/1, /2, /3
29.3.4 Front cover/1, /2, /3
29.3.5 Left cover/Fr1, left cover/Fr2, left cover/Fr3
29.3.6 Left cover/Rr
29.3.7 Upper cover/RrRt1, /RrRt2, /RrRt3, /RrRt4, /RrRt5, /RrRt6
29.3.8 Upper cover/FrRt1, /FrRt2, /FrRt3
29.3.9 Upper cover/FrLt1, /FrLt2
29.3.10 Upper cover/RrLt1, /RrLt2, /RrLt3, sub tray cover
29.3.11 Opening and closing of the front console
29.3.12 Front console
29.3.13 Gripper paper exit unit
29.3.14 Open and close of the booklet tray section door
29.3.15 Moving up and down of the booklet holding
29.3.16 Note for replacing the board
30. CR-101
30.1 Items not allowed to be disassembled/reassembled
30.1.1 Red-painted screws
30.2 List of disassembling and assembling parts
30.3 Disassembling and assembling procedures
30.3.1 Precautions on disassembling and assembling
30.3.2 Creaser unit
31.

AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L'nin Sökülmesi/Yeniden Montajı

Ürün Kodu: AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L
Stok Durumu: Stokta var

Adet

Etiketler: AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L'nin Sökülmesi/Yeniden Montajı

AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L’nin Sökülmesi/Yeniden Montajı

Giriş

Sökme/Yeniden Montaj Prosedürü

Sökülmemesi Gereken Parçalar

Sökme İşlemi

Yeniden Montaj İşlemi

Sonuç

Sıkça Sorulan Sorular

AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L'nin Sökülmesi/Yeniden Montajı