WhatsApp Şimdi Ara

  • Alışveriş sepetiniz boş!

  • Konica Minolta AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L Periyodik Bakım Prosedürü

AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L Periyodik Bakım Prosedürü

Giriş

Konica Minolta’nın AccurioPress C3080/C3080P/C3070 ve AccurioPrint C3070L modelleri, dijital renkli baskı teknolojisinin en son örneklerinden biridir. Bu yazıcılar, yüksek hızlı baskı yetenekleri, geniş medya desteği ve otomatik çift taraflı baskı gibi özellikleri ile dikkat çekmektedir1. Ancak, bu karmaşık makinelerin kullanımı sırasında bazen hatalar oluşabilir. Bu makalede, bu modellerin periyodik bakım prosedürlerini detaylı bir şekilde inceleyeceğiz

.


Periyodik Bakım Prosedürü

Bakım Zamanlaması

AccurioPress ve AccurioPrint modelleri, yoğun iş yükleri altında bile yüksek performans sağlamak için düzenli bakım gerektirir. Bakım zamanlaması, yazıcının kullanım sıklığına ve çalışma koşullarına bağlıdır. Genellikle, belirli bir sayıda baskıdan sonra veya belirli bir süre sonra bakım gereklidir2.



Bakım İşlemleri

Bakım işlemleri genellikle aşağıdakileri içerir2:

  • Yazıcı içindeki toz ve kirin temizlenmesi
  • Baskı kafalarının ve diğer önemli bileşenlerin kontrol edilmesi ve gerektiğinde değiştirilmesi
  • Yazılım güncellemelerinin yüklenmesi
  • Yazıcının genel durumunun kontrol edilmesi

Bakımın Önemi

Düzenli bakım, yazıcının performansını ve güvenilirliğini korur. Ayrıca, potansiyel sorunları erken tespit ederek daha büyük sorunları ve pahalı onarımları önler2.



Sonuç

Konica Minolta AccurioPress C3080/C3080P/C3070 ve AccurioPrint C3070L modelleri, yüksek hızlı baskı, geniş medya desteği ve büyük kağıt kapasitesi gibi özellikleri ile dikkat çekici bir yazıcıdır. Ancak, bu yazıcıların kullanımı sırasında hatalar oluşabilir. Bu hataların çoğu, hata kodları kullanılarak teşhis edilebilir ve giderilebilir. Düzenli bakım, bu hataların önlenmesine yardımcı olur ve yazıcının uzun ömürlü ve güvenilir bir şekilde çalışmasını sağlar.

Sıkça Sorulan Sorular

  1. AccurioPress ve AccurioPrint modelleri ne sıklıkla bakım gerektirir?

  2. Bakım işlemleri neleri içerir?

  3. Bakım neden önemlidir?

  4. Bakımı kim yapmalıdır?

  5. Bakım sırasında hangi parçalar kontrol edilir veya değiştirilir?


    2.  External section
    3. 4.1.1 Replacement of the developing dust-proof filter/1, the developing dust-proof filter/2, the PH dust-proof filter and the suction dust-proof filter
    4. 4.1.2 Replacement of the filter box
    5. 4.1.3 Replacement of the electric component cooling filter
    6. 4.2 Write section
    7. 4.2.1 Cleaning the dust proof glass
    8. 4.3 Photo conductor section
    9. 4.3.1 Pulling out the process unit
    10. 4.3.2 Cleaning around the process unit
    11. 4.3.3 Replacing the drum unit
    12. 4.4 Charging section
    13. 4.4.1 Replace the charging corona
    14. 4.4.2 Cleaning the charging corona
    15. 4.5 Developing section
    16. 4.5.1 Developer charging procedures
    17. 4.5.2 Replacing the Developing unit/Y, /M, /C, /K
    18. 4.6 Intermediate transfer section
    19. 4.6.1 Removing/reinstalling the intermediate transfer unit
    20. 4.6.2 Replacing the transfer belt cleaning unit
    21. 4.6.3 Replacing the belt cleaning blade and the side seal
    22. 4.6.4 Replacing the toner collection sheet
    23. 4.6.5 Replacing the transfer belt separation claw
    24. 4.6.6 Replacing the intermediate transfer belt, and cleaning of the rollers and the cleaning sheet
    25. 4.6.7 Replacing the 1st transfer roller/Y, /M, /C and /K and the transfer roller bearing/Y, /M, /C and /K
    26. 4.6.8 Replacing the 2nd transfer roller/Up
    27. 4.6.9 Replacing the belt separation claw solenoid (SD2)
    28. 4.6.10 Removing and reinstalling the 2nd transfer unit
    29. 4.6.11 Replacing the 2nd transfer roller/Lw and the C-clip, and cleaning around the 2nd transfer unit
    30. 4.6.12 Replacing the separate discharging unit
    31. 4.6.13 Replacing the 2nd transfer earth plate assy
    32. 4.7 Toner collection section
    33. 4.7.1 Replacing the waste toner box
    34. 4.8 Paper feed section
    35. 4.8.1 Replacement of the pick-up roller/1, pick-up roller/2, paper feed roller rubber/1 and paper feed roller rubber/2
    36. 4.8.2 Replacement of the separation roller rubber/1 and separation roller rubber/2
    37. 4.8.3 Cleaning the slide sheet
    38. 4.8.4 Replacement of the paper feed clutch/1 (CL1), paper feed clutch/2 (CL2), pre-registration clutch/1 (CL3) and preregistration clutch/2 (CL4)
    39. 4.9 Vertical conveyance section
    40. 4.9.1 Replacement of the intermediate conveyance clutch/1 (CL5)
    41. 4.10 Registration section
    42. 4.10.1 Replacing the registration cleaning sheet assy
    43. 4.10.2 Cleaning of the registration cleaning sheet assy
    44. 4.10.3 Replacing the registration roller and the registration roller bearing, cleaning the registration swing home sensar (PS20)
    45. 4.10.4 Replacing the registration idler gear
    46. 4.11 Fusing section
    47. 4.11.1 Removing/reinstalling the fusing unit
    48. 4.11.2 Replacing the fusing heater lamp 1 assy/Up and the fusing heater lamp 2 assy/Up
    49. 4.11.3 Replacing the fusing belt assy
    50. 4.11.4 Replacement of the fusing temperature sensor/3 (TH3)
    51. 4.11.5 Replacement of the fusing gear/1, fusing bearing/Lw2, heat insulating sleeve/Lw2, fusing roller/Lw
    52. 4.11.6 Replacement of the fusing temperature sensor/4 (TH4)
    53. 4.11.7 Replacement of the fusing gear/2, the fusing gear/3
    54. 4.11.8 Replacement of the fusing separating claw assy
    55. 4.11.9 Replacing the fusing paper exit roller/Up
    56. 4.12 Duplex section
    57. 4.12.1 Replacement of the intermediate conveyance clutch/2 (CL6), and the intermediate conveyance clutch/3 (CL7)
    58. 4.13 Reverse and exit section
    59. 4.13.1 Replacing the reverse de-curler roller
    60. 4.13.2 Replacing the paper exit drive gear/1, paper exit gear and paper exit decurler roller
    61. 4.14 Charge control section
    62. 4.14.1 Replacing the Charging Roller/Up
    63. 4.14.2 Replacing the charging roller bearing/Fr and charging roller bearing/Rr
    64. 4.14.3 Replacing the paper exit drive gear/2
    65. 5. PERIODICAL MAINTENANCE PROCEDURE DF-706
    66. 5.1 Take-up section
    67. 5.1.1 Cleaning of the pick-up roller/feed roller
    68. 5.1.2 Cleaning of the separation roller
    69. 5.1.3 Cleaning the torque limiter
    70. 5.1.4 Replacing the pick-up roller/feed roller
    71. 5.1.5 Replacing the separation roller
    72. 5.1.6 Cleaning of the reflective sensor section
    73. 5.2 Transport section
    74. 5.2.1 Cleaning of the miscellaneous rolls
    75. 5.2.2 Cleaning of the miscellaneous rollers
    76. 5.3 Scanning section
    77. 5.3.1 Cleaning of the front side scanning guide
    78. 6. PERIODICAL MAINTENANCE PROCEDURE PF-602m
    79. 6.1 Precautions on maintenance
    80. 6.2 Tray section
    81. 6.2.1 Precautions on maintenance of the tray section
    82. 6.2.2 Replacing the Pick-up rubber/paper feed roller
    83. 6.2.3 Replacing the separation roller
    84. 6.2.4 Replacing the paper feed clutch (CL1/CL4) and the separation clutch (CL2/CL5)
    85. 6.3 Conveyance section
    86. 6.3.1 Replacing the vertical conveyance clutch/1 (CL7), /2 (CL8), and /3 (CL9)
    87. 6.3.2 Replacing the horizontal conveyance clutch/1 (CL10), /2 (CL11), and pre-registration clutch (CL12)
    88. 7. PERIODICAL MAINTENANCE PROCEDURE PF-707m
    89. 7.1 Precautions on maintenance
    90. 7.2 Paper feed tray section
    91. 7.2.1 Replacing the loop roller/Lw and the loop roller bearing/Lw
    92. 7.3 Paper feed suction section
    93. 7.3.1 Replacing the suction belt clutch/1 (CL15), the suction belt clutch/2 (CL16), the suction belt clutch/3 (CL17)
    94. 7.4 Vertical conveyance section
    95. 7.4.1 Replacement of the exit clutch/1 (CL1), /2 (CL2), the vertical conveyance clutch/1 (CL3), /2 (CL4) ,the vertical
    96. conveyance clutch/3 (CL5) and /4 (CL6)
    97. 7.5 Horizontal conveyance section
    98. 7.5.1 Replacing the horizontal conveyance clutches/1 (CL8), /2 (CL9)
    99. 7.5.2 Replacing the pre-registration roller and the pre-registration roller bearing
    100. 7.5.3 Replacing the horizontal conveyance rollers/1, /2, and the horizontal conveyance roller bearings/1, /2
    101. 7.5.4 Replacing the loop roller/Up
    102. 7.5.5 Replacing the roller pressure release motor (M10)
    103. 7.5.6 Cleaning the centering sensor (PS40)
    104. 8. PERIODICAL MAINTENANCE PROCEDURE FA-502
    105. 8.1 Precautions on maintenance
    106. 8.2 Tandem conveyance section
    107. 8.2.1 Replacing the tandem conveyance clutches /1 (CL10), /2 (CL11), /3 (CL12), /4 (CL13), and /5 (CL14)
    108. 9. PERIODICAL MAINTENANCE PROCEDURE LU-202m/LU-202XL/LU-202XLm
    109. 9.1 Precautions on maintenance
    110. 9.2 Paper feed section
    111. 9.2.1 Cleaning the pre-registration roller
    112. 9.2.2 Removing/installing paper feed roller assy
    113. 9.2.3 Replacing the paper feed roller/pick-up roller
    114. 9.2.4 Replacing the separation roller
    115. 9.2.5 Replacing paper feed clutch (CL101) /pre-registration clutch (CL102)
    116. 9.2.6 Replacing the pre-registration roller
    117. 10. PERIODICAL MAINTENANCE PROCEDURE MB-506
    118. 10.1 Precautions on maintenance
    119. 10.2 Paper feed section
    120. 10.2.1 Replacing the pick-up roller/BP, the paper feed roller rubber/BP, and the paper feed clutch/BP (CL14)
    121. 10.2.2 Replacing the separation roller rubber/BP
    122. 11. PERIODICAL MAINTENANCE PROCEDURE MB-508
    123. 11.1 Precautions on maintenance
    124. 11.2 Bypass paper feed section
    125. 11.2.1 Replacing the paper feed clutch/BP (CL3) and lift clutch/BP
    126. 11.2.2 Replacing the paper feed roller/BP, separation roller/BP, and pick-up roller/BP
    127. 11.2.3 Replacing the torque limiter/BP
    128. 11.2.4 Replacing the up down motor/BP (M4)
    129. 11.3 Relay conveyance section
    130. 11.3.1 Cleaning the horizontal conveyance guide plate, bypass conveyance sensor/BP1 (PS1), /BP2 (PS2), pre-registration sensor/BP (PS3), relay exit sensor/BP (PS4), relay conveyance sensor/BP1 (PS5), and /BP2 (PS6)
    131. 11.3.2 Replacing the pre-registration clutch/BP (CL1)
    132. 11.3.3 Replacing the pre-registration roller/BP and pre-registration roller bushing/BP
    133. 11.3.4 Replacing the intermediate conveyance clutch/BP (CL2)
    134. 11.3.5 Replacing the intermediate conveyance roller/BP, intermediate conveyance roller bushing/BP, and conveyance torque limiter/BP
    135. 11.3.6 Replacing the exit roller/BP and exit roller bearing/BP
    136. 11.3.7 Replacing the lift sheet/BP
    137. 12. PERIODICAL MAINTENANCE PROCEDURE OT-510
    138. 12.1 Main tray section
    139. 12.1.1 Cleaning and lubrication of the paper exit alignment plate shaft
    140. 13. PERIODICAL MAINTENANCE PROCEDURE OT-511
    141. 13.1 Replacing the paper hold roller
    142. 13.1.1 Procedure
    143. 13.2 Replacing the paper exit roller
    144. 13.2.1 Procedure
    145. 13.3 Replacing the paper exit driven roller/2
    146. 13.3.1 Procedure
    147. 14. PERIODICAL MAINTENANCE PROCEDURE EF-103
    148. 14.1 Precautions on maintenance
    149. 14.2 Fusing section
    150. 15. PERIODICAL MAINTENANCE PROCEDURE RU-518/HM-103
    151. 15.1 Precautions on maintenance
    152. 15.2 Output tray section
    153. 15.2.1 Replacing the paper exit gate solenoid (SD3)
    154. 15.3 Output paper density detection section
    155. 15.3.1 Replacing the color sensor shutter solenoid (SD1)
    156. 15.3.2 Replacing the paper press solenoid (SD2)
    157. 15.4 Water supply section
    158. 15.4.1 Replacing the water feed control solenoid (SD4)
    159. 15.4.2 Replacing the pump motor (M401)
    160. 15.4.3 Replacing the water feed filter
    161. 15.4.4 Cleaning the water storage tank
    162. 15.5 Humidification section
    163. 15.5.1 Cleaning the supply roller/Up and the water feed roller/Up
    164. 15.5.2 Cleaning the water feed roller/Lw and the humidification roller/Lw
    165. 15.5.3 Removing the humidification section assy/Up
    166. 15.5.4 Replacing the control roller/Up
    167. 15.5.5 Replacing the humidification roller/Up and the humidification roller/Lw
    168. 15.5.6 Replacing the water feed roller/Lw
    169. 15.5.7 Replacing the control roller/Lw
    170. 16. PERIODICAL MAINTENANCE PROCEDURE RU-510
    171. 16.1 Precautions on maintenance
    172. 16.2 Conveyance section
    173. 16.2.1 Replacing the paper re-feed roller drive gear/1 and the paper re-feed roller drive gear/2
    174. 16.2.2 Replacing the entrance conveyance motor (M1), the entrance conveyance belt, the paper exit motor (M2), the paper exit conveyance belt
    175. 16.2.3 Replacing the paper exit pulley and the conveyance pulley
    176. 16.2.4 Replacing the entrance roller/1, /2, paper exit roller, bearing /K and bearing assy
    177. 16.2.5 Replacing the merging section roller and bearing/K
    178. 16.2.6 Replacing the stacker entrance roller and bearing/K
    179. 16.2.7 Replacing the re-feed roller and bearing/K
    180. 16.2.8 Replacing the driven roller
    181. 16.2.9 Replacing the straight gate
    182. 16.2.10 Replacing the stack switch motor (M6)
    183. 17. PERIODICAL MAINTENANCE PROCEDURE FS-531
    184. 17.1 Precautions on maintenance
    185. 17.2 Conveyance section
    186. 17.2.1 Replacing the intermediate conveyance roller (sponge roller)
    187. 17.3 Main tray section
    188. 17.3.1 Replacing the paper exit roller (sponge roller)
    189. 17.4 Stacker section
    190. 17.4.1 Replacing the paper assist roller (sponge roller)
    191. 17.4.2 Replacement of the cleaning plate Assy
    192. 17.5 Stapler section
    193. 17.5.1 Replacing the stapler unit
    194. 18. PERIODICAL MAINTENANCE PROCEDURE FS-612
    195. 18.1 Precautions on maintenance
    196. 18.2 Conveyance section
    197. 18.2.1 Replacing the intermediate conveyance roller (sponge roller)
    198. 18.3 Main tray section
    199. 18.3.1 Replacing the paper exit roller (sponge roller)
    200. 18.4 Stacker section
    201. 18.4.1 Replacing the paper assist roller (sponge roller)
    202. 18.5 Stapler section
    203. 18.5.1 Removing/reinstalling the stapler unit cover
    204. 18.5.2 Replacing the stapler unit
    205. 19. PERIODICAL MAINTENANCE PROCEDURE PI-502
    206. 19.1 Precautions on maintenance
    207. 19.2 Paper feed section
    208. 19.2.1 Replacing the pick-up roller/Up and the paper feed roller/Up
    209. 19.2.2 Replacing the pick-up roller/Lw and the paper feed roller/Lw
    210. 19.2.3 Replacing the separation roller/Up and the torque limiter/Up
    211. 19.2.4 Replacing the separation roller/Lw and the torque limiter/Lw
    212. 19.2.5 Replacing the paper feed clutch/Up (CL201) and the paper feed clutch/Lw (CL202)
    213. 20. PERIODICAL MAINTENANCE PROCEDURE IQ-501
    214. 20.1 Precautions on maintenance
    215. 20.2 Conveyance section
    216. 20.2.1 Pulling out/reinstalling the conveyance mount
    217. 20.3 Scanner section/Scanner calibration section
    218. 20.3.1 Cleaning the scanner glass/1, /2
    219. 20.3.2 Cleaning the scanner B&W standard part/1, scanner white backing/1, scanner black backing/1-1, /1-2
    220. 20.3.3 Cleaning the scanner B&W standard part/2, scanner white backing/2, scanner black backing/2-1, /2-2
    221. 20.4 Colorimeter section/Colorimeter calibration section
    222. 20.4.1 Cleaning the colorimeter glass and the colorimetry trigger sensor (PS013)
    223. 20.4.2 Cleaning the paper temperature sensor (TEMS4), colorimeter white backing, and colorimeter white calibration block
    224. 21. PERIODICAL MAINTENANCE PROCEDURE FS-532
    225. 21.1 Precautions on maintenance
    226. 21.2 Paper conveyance section
    227. 21.2.1 Lubrication of the FNS entrance roller conveyance switching cam, the FNS entrance roller conveyance switching gate/Up
    228. 21.3 Stacker section
    229. 21.3.1 Replacing the paddle
    230. 21.3.2 Lubrication of the stapler shaft and the rear stopper shaft
    231. 21.4 Stapler section
    232. 21.4.1 Replacing the stapler unit
    233. 21.5 Main tray section
    234. 21.5.1 Cleaning and lubrication of the paper exit alignment plate shaft
    235. 22. PERIODICAL MAINTENANCE PROCEDURE SD-510
    236. 22.1 Precautions on maintenance
    237. 22.2 Alignment section
    238. 22.2.1 Replacing the paddle/1, the paddle/2, and the paddle/3
    239. 22.3 Stapler section
    240. 22.3.1 Replacing the stapler unit
    241. 22.3.2 Cleaning and lubrication of the staple guide/Up and the staple guide/Lw
    242. 22.4 Half-fold/folding&staple/tri-folding section
    243. 22.4.1 Cleaning the folding roller/1, the folding roller/2
    244. 23. PERIODICAL MAINTENANCE PROCEDURE LS-506
    245. 23.1 Precautions on maintenance
    246. 23.2 Conveyance section
    247. 23.2.1 Replacing the stacker tray up down motor (M1)
    248. 23.2.2 Replacing the paper press solenoid/3 (SD8)
    249. 23.2.3 Replacing the paper press solenoid/1 (SD6)
    250. 23.2.4 Replacing the paper press solenoid/2 (SD7)
    251. 23.2.5 Replacing the rear stopper solenoid (SD3)
    252. 24. PERIODICAL MAINTENANCE PROCEDURE FD-503
    253. 24.1 Precautions on maintenance
    254. 24.2 Conveyance section
    255. 24.2.1 Replacing roller solenoids/1 (SD5) to /4 (SD8)
    256. 24.3 Punch section
    257. 24.3.1 Replacing the punch unit
    258. 24.3.2 Cleaning the punch shaft and the punch support board
    259. 24.3.3 Lubricating the punch drive section
    260. 24.4 Folding conveyance section
    261. 24.4.1 2nd folding roller solenoid (SD18)
    262. 24.5 Main tray section
    263. 24.5.1 Replacing the tray up down motor (M11)
    264. 24.6 PI section
    265. 24.6.1 Replacing the pick-up rubber (Upper stage)
    266. 24.6.2 Replacing the paper feed rubber (Upper stage)
    267. 24.6.3 Replacing the separation rubber (upper stage)
    268. 24.6.4 Replacing the pick-up rubber (Lower stage)
    269. 24.6.5 Replacing the paper feed rubber (lower stage)
    270. 24.6.6 Replacing the separation rubber (lower stage)
    271. 25. PERIODICAL MAINTENANCE PROCEDURE SD-506
    272. 25.1 Precautions on maintenance
    273. 25.2 Right angle conveyance section
    274. 25.2.1 Replacing the roller release solenoid/1 (SD5)
    275. 25.2.2 Replacing the roller release solenoid/2 (SD6)
    276. 25.2.3 Replacing the right angle conveyance gate solenoid (SD2)
    277. 25.2.4 Replacing the roller release solenoid/3 (SD7)
    278. 25.3 Saddle stitching section
    279. 25.3.1 Replacing the stapler assy
    280. 25.3.2 Replacing the slope unit
    281. 25.3.3 Pulling out the saddle stitching unit
    282. 25.3.4 Replacing the saddle stitching unit
    283. 25.4 Bundle processing section
    284. 25.4.1 Replacing the bundle press stage gear
    285. 25.4.2 Replacing the bundle press stage unit
    286. 25.5 Trimmer section
    287. 25.5.1 Removing/installing the trimmer paddle assy
    288. 25.5.2 Replacing the trimmer board assy
    289. 25.5.3 Replacing the trimmer blade kit
    290. 25.5.4 Replacing the trimmer press motor (M32)
    291. 25.5.5 Replacing the trimmer blade motor (M31)
    292. 25.5.6 Replacing the trimming unit
    293. 25.5.7 Lubrication to the trimmer unit
    294. 26. PERIODICAL MAINTENANCE PROCEDURE SD-513
    295. 26.1 Precautions on maintenance
    296. 26.2 Entrance conveyance section
    297. 26.2.1 Replacing the reverse exit roller pressure release motor (M102)
    298. 26.2.2 Cleaning of the paper re-feed roller/Lt
    299. 26.2.3 Cleaning of the reverse exit roller/Rt
    300. 26.3 Folding conveyance section
    301. 26.3.1 Replacing the 1st folding knife motor (M13)
    302. 26.3.2 Replacing the 2nd folding knife motor (M14)
    303. 26.3.3 Cleaning of the 1st folding roller, 2nd folding roller
    304. 26.3.4 Lubrication to the front stopper shaft
    305. 26.4 Sub tray, tri-folding tray section
    306. 26.4.1 Cleaning the tri-folding tray conveyance roller/3
    307. 26.5 Saddle stitching section
    308. 26.5.1 Replacing the staple unit
    309. 26.5.2 Replacing the clincher
    310. 26.5.3 Replacing the booklet holding motor (M17)
    311. 26.5.4 Lubrication to the saddle stitching alignment plate/Rr
    312. 26.5.5 Lubrication to the saddle stitching alignment plate shaft/Fr
    313. 26.5.6 Replacing the conveyance guide assy/Up
    314. 26.5.7 Replacing the alignment plate solenoid wiring
    315. 26.6 Booklet movement section
    316. 26.6.1 Lubrication to the booklet movement unit slide shaft
    317. 26.6.2 Lubrication to the booklet holding unit slide shaft
    318. 26.6.3 Lubrication to the booklet set unit slide shaft
    319. 26.7 Clamp section
    320. 26.7.1 Replacing the fore edge stopper motor (M24)
    321. 26.7.2 Replacing the fore edge finger motor (M52), the fore-edge finger gear, and the finger torque limiter
    322. 26.7.3 Replacing the clamp motor (M23)
    323. 26.7.4 Replacing the booklet holding wire/1, booklet holding wire/2 and booklet holding wire/3
    324. 26.7.5 Replacing the clamp hanging wire
    325. 26.8 Trimmer section
    326. 26.8.1 Replacing the trimmer blade
    327. 26.8.2 Replacing the trimmer board
    328. 26.8.3 Replacing the trimming unit
    329. 26.8.4 Replacing the trimmer blade motor (M31)
    330. 26.8.5 Replacing the trimmer press motor (M32)
    331. 26.8.6 Lubrication to the press drive screw, the gear
    332. 26.9 Booklet tray section
    333. 26.9.1 Replacing the gripper motor (M26)
    334. 26.9.2 Lubrication to the gripper paper exit gear/Fr, the gripper paper exit gear/Rr
    335. 26.9.3 Lubrication to the gripper lock plate
    336. 26.9.4 Lubrication to the shutter slide shaft and the shutter slide plate
    337. 27. PERIODICAL MAINTENANCE PROCEDURE CR-101
    338. 27.1 Precautions on maintenance
    339. 27.2 Creaser section
    340. 27.2.1 Cleaning the crease blade
    341. 28. PERIODICAL MAINTENANCE PROCEDURE TU-503
    342. 28.1 Precautions on maintenance
    343. 28.2 Conveyance section
    344. 28.2.1 Cleaning the registration roller
    345. 28.2.2 Replacing the registration roller
    346. 28.3 Slitter section
    347. 28.3.1 Lubrication to the slit cutter shaft
    348. 28.3.2 Lubrication to the slit cutter drive gear
    349. 28.3.3 Replacing the slit cutter assy/Fr, /Rr
    350. 28.4 Rotary cutter section
    351. 28.4.1 Replacing the rotary cutter assy
    352. 28.4.2 Cleaning the slit scraps roller/Lt and slit scraps roller/Rt
    353. 29. PERIODICAL MAINTENANCE PROCEDURE FD-504
    354. 29.1 Precautions on maintenance
    355. 29.2 Clamp section
    356. 29.2.1 Lubrication to FD clamp
    357. 29.2.2 Replacing the FD clamp motor/Rr (M202)
    358. 29.2.3 Replacing the FD clamp motor/Fr (M203)
    359. 29.3 Spine corner forming sction
    360. 29.3.1 Replacing the FD roller motor (M201)
    361. 29.3.2 Replacing the FD roller cleaning assy/Fr, /Rr
    362. 30. PERIODICAL MAINTENANCE PROCEDURE PB-503
    363. 30.1 Conveyance section
    364. 30.1.1 Replacement of the entrance gate solenoid (SD1), the sub tray paper exit solenoid (SD4)
    365. 30.2 Sub compile (SC) section
    366. 30.2.1 Precautions on maintenance
    367. 30.2.2 Replacing the switchback roller
    368. 30.2.3 Replacing the SC switchback release motor (M13) and the one-way clutches/A and /B
    369. 30.2.4 Replacing the SC pressure arm solenoid (SD13)
    370. 30.2.5 Replacing the FD alignment solenoid (SD11)
    371. 30.2.6 Lubrication to the sub scan alignment plate shaft
    372. 30.3 Clamp section
    373. 30.3.1 Lubrication to the clamp pressing board shaft
    374. 30.4 Glue tank section
    375. 30.4.1 Replacing the glue apply roller drive gear bearing
    376. 30.4.2 Lubrication to the glue apply roller drive gear
    377. 30.4.3 Replacing the pellet supply cooling fan (FM4)
    378. 30.4.4 Replacing the glue tank assy
    379. 30.5 Cover paper supply section
    380. 30.5.1 Removing/reinstalling the pick-up roller assy and the separation roller assy
    381. 30.5.2 Replacing the pick-up roller and the paper feed roller
    382. 30.5.3 Replacing the separation roller
    383. 30.5.4 Replacing the cover paper pick-up clutch (CL71) and the cover paper separation clutch (CL72)
    384. 30.6 Cover paper table section
    385. 30.6.1 Precautions on maintenance
    386. 30.6.2 Replacing the roller cutter blade assy
    387. 30.6.3 Cleaning the cover paper folding plate and the book spine backing plate
    388. 30.6.4 Lubrication to the cover paper alignment plate shaft
    389. 30.7 Book stock section
    390. 30.7.1 Lubrication to the guide shafts/Rt and /Lt
    391. 30.8 Framework section
    392. 30.8.1 Replacing the exhaust filters/A and /B
    393. 31. PERIODICAL MAINTENANCE PROCEDURE GP-501
    394. 31.1 Caution for maintenance procedure
    395. 31.2 DIE SET SERVICE
    396. 31.2.1 Die Set Service
    397. 31.2.2 Die Set Life Expectancy
    398. 31.2.3 Die Set Components
    399. 31.2.4 Checking and Replacing the Die Set
    400. 31.2.5 Checking and lubricating the Die Set pins and Die Set shoulder bolts
    401. 31.2.6 Hole Alignment inspection
    402. 31.3 CHECK, CLEANING, AND LUBRICATION
    403. 31.3.1 CHECK, CLEANING, AND LUBRICATION
    404. 31.3.2 External Cleaning
    405. 31.3.3 Internal Cleaning
    406. 31.3.4 Operational Inspection
    407. 31.3.5 Internal Inspection
    408. 31.3.6 Cleaning the base
    409. 31.3.7 Cleaning the Die guide
    410. 31.3.8 Checking the Door Latch
    411. 31.3.9 Cleaning and Checking the aligner paper path and panels
    412. 31.3.10 Cleaning and Checking the Aligner Idler Roller

    Konica Minolta AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L Periyodik Bakım Prosedürü

    • Ürün Kodu: Konica Minolta AccurioPress C3080/C3080P/C3070 Bakım Prosedürü
    • Stok Durumu: Stokta var

    Etiketler: Konica Minolta AccurioPress C3080/C3080P/C3070, AccurioPrint C3070L Periyodik Bakım Prosedürü